howto/mikrotik/ptp32.md
... ...
@@ -1,3 +1,5 @@
1
+# How to setup Mikrotik with point-to-point /32 address on interfaces
2
+
1 3
## RouterOS issues
2 4
3 5
* RouterOS doesn't have direct Point-to-Point addresses.
... ...
@@ -5,7 +7,7 @@
5 7
6 8
The long explanation about how mikrotik resolves recursive routes is documentated at [Mikrotik's page](https://wiki.mikrotik.com/wiki/Manual:IP/Route#Nexthop_lookup).
7 9
8
-How can we workaround these issues? Simple. We setup a /32 on the Point-to-Point interface, we setup a direct route to our to other peer (using the interface as next-hop for this route) and use bgp filters to change the next-hop interface.
10
+How can we workaround these issues? Simple. We setup a /32 on the Point-to-Point interface, we setup a direct route to the other peer (using the interface as next-hop for this route) and use bgp filters to change the next-hop interface.
9 11
10 12
## Legend
11 13
... ...
@@ -14,7 +16,7 @@ How can we workaround these issues? Simple. We setup a /32 on the Point-to-Point
14 16
* gre-dn42-peer -> This is the name of the interface
15 17
* 1.1.1.1 - peer external IP
16 18
* 2.2.2.2 - your external IP
17
- * bgp-dn42-peer-in -> This is the name of the chain filter. You should use a different chain per point to point link
19
+ * bgp-dn42-peer-in -> This is the name of the chain filter. You need to use a different chain per point to point link
18 20
19 21
## Setup
20 22