d71e2a399e5f8298cfee02cf47a60bf885d47deb
howto/Quagga.md
| ... | ... | @@ -10,4 +10,36 @@ Use this in your `zebra.conf`: |
| 10 | 10 | set src 172.22.XX.XX |
| 11 | 11 | ip protocol bgp route-map RM_SET_SRC |
| 12 | 12 | |
| 13 | -Unfortunately, this is not possible with IPv6... |
|
| ... | ... | \ No newline at end of file |
| 0 | +Unfortunately, this is not possible with IPv6... |
|
| 1 | + |
|
| 2 | +## Important bgp commands |
|
| 3 | +To connect to bgpd use: |
|
| 4 | + |
|
| 5 | + $ vtysh |
|
| 6 | + |
|
| 7 | +Which provides an interactive interface. |
|
| 8 | +In this interface the following commands can be used: |
|
| 9 | + |
|
| 10 | + |
|
| 11 | +# show bpg session status |
|
| 12 | + |
|
| 13 | +in this example: |
|
| 14 | +* an active bgp session exists with peer 64713. |
|
| 15 | +* no (vpn) connection at all exists with peer 64692 |
|
| 16 | +* a (vpn) connection with 4242421375 exists, but no bgp session |
|
| 17 | + |
|
| 18 | +``` |
|
| 19 | +vtysh> show ip bgp summary |
|
| 20 | +BGP router identifier 172.22.100.254, local AS number 64698 |
|
| 21 | +RIB entries 938, using 103 KiB of memory |
|
| 22 | +Peers 11, using 49 KiB of memory |
|
| 23 | +Peer groups 1, using 32 bytes of memory |
|
| 24 | + |
|
| 25 | +Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd |
|
| 26 | +172.22.92.247 4 64692 0 0 0 0 0 never Connect |
|
| 27 | +... |
|
| 28 | +172.22.113.2 4 64713 2206 865 0 0 0 01:23:11 322 |
|
| 29 | +.... |
|
| 30 | +172.23.64.1 4 4242421375 0 0 0 0 0 never Active |
|
| 31 | +fe80::deca:fbad 4 64699 902 694 0 0 0 01:23:57 486 |
|
| 32 | +``` |
|
| ... | ... | \ No newline at end of file |